This shift cable guide replaces the bolt-on cable stop and allows running full-length housing for the rear derailleur. It uses the included M3 bolts and is tested with SRAM and Shimano 4mm shift housing. There’s a second version with a channel to allow a zip tie for greater cable retention. I also created some brake hose clips that accommodate one or two shift cable housings to cleanly run the full-length housing along the rest of the frame. [add link to clips]
Update: I printed this in PETG with very good results and added a photo of the guide with a ziptie.
Download
Print settings
- Layer height
- 0.2 mm
- Nozzle
- 0.4 mm
- Infill
- 100%
- Supports
- Yes
- Filament
- PETG
- Printer
- Creality Ender 6